Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618

Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618 - Hình ảnh 2

Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618 - Hình ảnh 3

Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618 - Hình ảnh 4

Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618 - Hình ảnh 5

Thiết bị phát sóng Wifi6 gắn tường BDCOM WAP2100-W618

BDCOM> Thiết bị mạng> Wireless SKU: WAP2100-W618

WAP2100-W
WAP2100-W618	AP WiFi6 thông minh gắn tường WAP2100-W618, 1 cổng PoE GE-WAN, 4 cổng GE-LAN, ăng-ten MIMO tích hợp, WiFi6, 1775Mbps, nguồn cấp PoE (cần mua thiết bị POE.)

Liên hệ

Cho phép đặt hàng trước

Mô tả

AP WiFi6 âm tường 1800M
WAP2100-W618 là AP không dây âm tường WiFi6 hiệu suất cao do BDCOM phát triển dành cho các tình huống trong nhà đòi hỏi nhiều không gian như ký túc xá trường học, phòng khách sạn, khoa bệnh viện và căn hộ.

Tính năng nổi bật
– Giải pháp không dây hiệu suất cao
– Chi tiết thiết kế thân thiện với người dùng
– Tính năng bảo mật toàn diện

Ứng dụng điển hình

Thông số kỹ thuật

WAP2100-W618

Mounting method	In-wall
Dimensions (HxWxD)	86×86×45mm
Ethernet port	1 GE WAN port (POE supported) 3 GE LAN ports 1 RJ11 port
PoE power supply	POE input
Antenna type	Built-in omnidirectional
Antenna gain	2.4G: 2.5dBi 5G: 2.5dBi
Operating frequency bands	2.4GHz and 5GHz
Wi-Fi data rate	2.4G: 22 11ax 573Mbps 5G: 22 11ax 1200Mbps
Maximum transmit power	2.4 GHz: 18 dBm (combined power) 5 GHz: 18 dBm (combined power) The actual transmit power depends on local laws and regulations.
Modulation	OFDM : BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9 MIMO-OFDM (11ax): MCS 0-11
Modulation mode	11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
Power adjustment	Automatic
Reset	Supported
Status LED	Solid on / Blinking/ Network error (The LED can be turned oﬀ using software.)
Operating temperature/ Storage temperature	0ºC~50ºC
Operating humidity	10%~95% (non-condensation)
Protection degree	IP41
Power consumption	< 10W
MTBF	> 250000H
11ax supported
Working frequency bands	2.4GHz+5GHz
A-MPDU	Supported
A-MSDU	Supported
MU-MIMO	Supported
OFDMA	Supported
Transmit Beamforming (TxBF)	Supported
Maximum Likelihood Demodulation (MLD)	Supported
Maximum Ratio Combining (MRC)	Supported
Space-Time Block Coding (STBC)	Supported
Low Density Parity Check (LDPC)	Supported
11ac supported
Working frequency bands	5GHz
A-MPDU	Supported
A-MSDU	Supported
Transmit Beamforming (TxBF)	Supported
Maximum Likelihood Demodulation (MLD)	Supported
Maximum Ratio Combining (MRC)	Supported
Space-Time Block Coding (STBC)	Supported
Low Density Parity Check (LDPC)	Supported
11n supported
Working frequency bands	2.4GHz+5GHz
A-MPDU	Supported
Transmit Beamforming (TxBF)	Supported
Maximum Likelihood Demodulation (MLD)	Supported
Maximum Ratio Combining (MRC)	Supported
Space-Time Block Coding (STBC)	Supported
Low Density Parity Check (LDPC)	Supported
WLAN basics
Maximum users per radio	128
WPAPSK/WPA2PSK/WPA3	Supported
RTS/CTS	Supported
Guest network	Supported
Smart device unique SSID	Supported
Automatic link fault detection and recovery	Supported
Advanced networking features
Automatic network-wide channel adjustment	4
Automatic network-wide bandwidth adjustment	Supported
802.11i	Supported
Encryption	AES, WPA3
Automatic network-wide power adjustment	Supported
Security policy
Authentication	MAC Address/PSK
User isolation	1.L ayer-2 user isolation 2.SSID-based user isolation
Forwarding security	Packet filtering, MAC address filtering, broadcast storm suppression
SSID-VLAN binding	Supported
802.11w	Supported
Layer-2 and layer-3 features
IP address configuration	Static IP address, DHCP, and PPPoE
Local forwarding	Local forwarding based on SSID+VLAN
Multicast	IGMP Snooping
Advanced Wi-Fi features
802.11e	WMM
Priority	Ethernet port 802.1P identification and marking Mapping from wireless priorities to wired priorities
Ai QoS	Mapping based on application traffic and air interface queue
Advanced Wi-Fi features
Automatic channel/bandwidth/power selection	Supported
Load balancinga	Based on traffic / number of users / bands / air interface load
802.11k/802.11v/802.11r	Supported
AP Steering	Supported
Band Steering	Supported
Automatic power control / Packet-by-packet power control	Supported
Multicast enhancement	Multicast-to-unicast (IPv4)
Installation, management and maintenance
Wizard-guided installation with app	Supported
Network pre-deployment	Supported
Local management with app/Remote management	Supported
Cloud AC management	Supported
Remote maintenance	Supported